For any ordering requirements please email
sales@healthsupply.net.au
or call 1300 663 828
Premium Nitrile Black Powder Free Gloves Micro Textured
$ 334.22
CARTON OF 1000
Additional information
| Size | XX Large, X Large, Large, Medium, Small |
|---|
DESCRIPTION
Black Nitrile Gloves provide outstanding resistance against many commonly used chemicals, and are more resistant to puncturing, they also do not show stains from Inks and dyes.
Certifications
Description
- Examination gloves
- Ambidextrous
- Beaded Cuff – Providing additional strength & preventing liquid roll off
- Latex free
- Our gloves are no less than 0.15mm thick on the finger and palm giving them increased puncture resistance and chemical breakthrough time
- Superior barrier protection over latex and vinyl
- Our gloves are designed with a fully textured finish to give the user greater sensitivity and further enhance their grip wherever it is needed
- Special polymer coating: Our gloves are finished with a slip coating on the inside to make the glove easier to don and an advanced grip coating on the outside to maximise their grip even when the glove is wet.
- Nitrile Black gloves do not show stains from inks and dyes
- Technical data sheets available
TECHNICAL
Dimensions
| Size | Palm Width (mm) | MGM Length (mm) | ASTM D3578-05 Length (mm) |
|---|---|---|---|
| S | 83-88 | Min. 230 | |
| M | 93-98 | Min. 230 | |
| L | 103-108 | Min. 230 | |
| XL | 113-118 | Min. 230 | |
| XXL | 118-123 | Min. 230 |
Thickness
| Location of Thickness Measurement | Single Wall (mm) |
|---|---|
| Finger | Min. 0.15 |
| Palm | Min. 0.15 |
| Cuff | Min. 0.10 |
Physical Properties
| Before Aging | After Aging | |
|---|---|---|
| Tensile Strength (MPa) | Min. 14/td> td>Min. 14 | |
| Elongation (%) | Min. 500 | |
| Modulus (500%) | Max. 5.5 MPa | |
| Force At Break (N) | Min 9 |
Test Results
| Inspection Level | AQL | |
|---|---|---|
| Watertight Test | G1 | |
| Major Defects | G1 | |
| Dimensions | S2 | |
| Physical Properties | S2 |
RETURNS
Returns
SHIPPING
Shipping